Tri-Max™ technology allows for a high capacity system in a small package.

Tri-Max™ provides you with both a fire prevention system and fire extinguishing capability. The superior foam blanket is formed of uniformly sized, small air bubbles that are very durable. The foam blanket will remain for hours without need for replenishment. For fuel and chemical spills, the foam cover seals the vapors to prevent ignition and can provide containment for hazmat clean up with little or no water run off. The Tri-Max™ produced foam adheres to the fuel surface and resists heat longer than ordinary foams. In confined areas, only a small percentage of foam is converted to steam as it travels through the fire to the fuel, thus greatly improving visibility. For class A fires, the excellent penetration of the foam stops combustion. The result - cleaner air and less supplemental damage. Tri-Max™ produced cold foam absorbs heat faster, thus reducing temperatures to further improve the fire fighting environment. Mechanical air compressors produce hot air, stored compressed air comes out cold. Tri-Max™ foam will cling to vertical surfaces providing superior exposure protection.

Tri-Max ™systems are operator friendly, simply open the air bottle valve and you are ready to discharge foam. Hose lines are very maneuverable as they are full of high energy cold foam, not heavy liquid. The high energy cold foam allows effective attack on the fire from a safer distance. The highly portable design will fit through doorways, into elevators and around equipment. There are no moving parts so maintenance is minimal.

Operating costs are low, allowing the Tri-Max™ system to be frequently used as a fire prevention tool and for training. Refills use a small quantity of foam concentrate and water. Tri-Max™ uses stored compressed air-not a large mechanical, high maintenance air compressor.  The Renegade™ twin agent skids and large Tri-Max™ units have two air bottles, each capable of pressurizing the vessel to move the solution and to inject air down stream to produce high energy cold foam for two full loads of premix agent.

Hydro-Chem™ Technology

The most effective method for extinguishing large pressure and flowing fuel fires.

By using foam solution as the means to propel, Encapsulated Dry Chemical Systems project dry chemical approximately three to four times farther than that of conventional dry chemical equipment.

Hydro-Chem™ technology gives the firefighter a safer and more efficient integrated system of delivering dry chemical onto large pressure and flowing fuel fires.

In operation, ground fires are extinguished using foam only. The foam solution applied then "ties-up" or harnesses the three dimensional fire, greatly reducing flame intensity. After this reduction in heat, dry chemical is then injected into the foam stream, resulting in a more efficient extinguishment of the fire. Each system is used in conjunction with customer-provided dry chemical storage equipment.